Laser Cut Formula 1 Model Toy

Based on Ferrari 2011 if I remember correctly. About 60 parts, designed for MDF 4.2mm (cuts are drawn 4.1mm). For the tires I used 8pc. of o-rings from Polymax (UK) - O Ring 40mm ID x 4mm cs EPDM 70 shore A. Size: L 32sm, W 12,5sm, H 8,5sm

This is what you will need to assemble and paint your model:

1) Wood-glue
2) Markers, crayons or acrylic paint
3) Old newspapers

Now your are ready to start!

1) Put newspapers on the table to prevent to stain it with glue or paint.
2) Remove the sticker film of the model.
3) Remove all parts that will not be used like the frame around the model but DO NOT through them out yet!
4) Start by assembling the rig for the tires (marked DM), use that to center the tires when you glue them.
5) Assemble the model without applying glue to understand how it will assemble.
6) Dis-assemble the model and paint the parts (you can also paint it after is assembled).
7) Assemble and glue the parts.
8) Make sure the glue and the paint is dry before you start playing with your new model.

Have fun!
TAKK TAKK