A laser cutted shadow throwing lamp in the shape of a dodecahedron made out of 3mm plywood. The description of the project can be found here https://fablab-wuerzburg.de/projekte/dodekaeder-lampe.
You need to cut only all the "all_parts_X"-dxf files, if you don't want to change the design. For this you need a laser cutter with a working area of minimum 500mm x 300mm.
If you want to redesign some parts, dxf-files of all single parts are also uploaded.
Here is a list of the number of the single parts you have to cut.
For the light source a 10W halogen lamp is used. Because lamp sockets differs you have to design your own socket. In "lamp_socket.dxf" is a prototype.
The light source should be as small as possible to obtain a sharp shadow.
| all_parts_1.dxf |
| all_parts_2.dxf |
| base.dxf |
| bottom.dxf |
| face.dxf |
| joint_base_base.dxf |
| joint_face_bottom.dxf |
| joint_face_face.dxf |
| lamp_socket.dxf |
