These are the keys for the Nerdy Gurdy Basic. They are normally made with lasercutting, but i thought 3D-printed ones would be cool to make.
The discrepancy in numbering is because i followed a three-string blueprint.
| Keys_all_in_one.stl | 10.9MB | |
| Part_Studio_1_-_High_01.stl | 1.1MB | |
| Part_Studio_1_-_High_02.stl | 1.0MB | |
| Part_Studio_1_-_High_03.stl | 1.1MB | |
| Part_Studio_1_-_High_04.stl | 767.9KB | |
| Part_Studio_1_-_High_05.stl | 795.1KB | |
| Part_Studio_1_-_High_06.stl | 746.2KB | |
| Part_Studio_1_-_High_07.stl | 763.3KB | |
| Part_Studio_1_-_High_10.stl | 760.2KB | |
| Part_Studio_1_-_Low_01.stl | 372.3KB | |
| Part_Studio_1_-_Low_02.stl | 376.0KB | |
| Part_Studio_1_-_Low_03.stl | 372.4KB | |
| Part_Studio_1_-_Low_04.stl | 368.9KB | |
| Part_Studio_1_-_Low_05.stl | 358.4KB | |
| Part_Studio_1_-_Low_06.stl | 368.9KB | |
| Part_Studio_1_-_Low_07.stl | 378.6KB | |
| Part_Studio_1_-_Low_08.stl | 379.3KB | |
| Part_Studio_1_-_Low_09.stl | 372.6KB | |
| Part_Studio_1_-_Low_10.stl | 358.4KB | |
| Part_Studio_1_-_Low_14.stl | 368.1KB |
