Rack And Pinion Steering 3D Printer Model
The file 'Rack And Pinion Steering 3D Printer Model' is (STL) file type, size is 1.4MB.
The file 'Rack And Pinion Steering 3D Printer Model' is (STL) file type, size is 1.4MB.
This is a simplified model of how a car steers using a rack and pinion setup.
To replicate this model you will need print:
1x Axle Left
1x Axle Right
1x Crank
1x Gear
4x Linkage Pins
2x Linkage
1x Rack
1x Steering Assembly Support
1x Steering Column
1x Steering Wheel
1x Track Left
1x Track Middle
1x Track Right
1x U Joint Inner
2x U Joint Outer
4x U Joint Pins
2x Wheels
Parts have been designed with a 0.5mm tolerance where necessary to ensure proper fitment. Gluing will be required between certain parts in order to make the model work as intended.
Please let me know what you think of the design and any areas you think could be improved. Thanks!
| Axle_Left.STL | 483.2KB | |
| Axle_Right.STL | 469.2KB | |
| Crank.STL | 105.6KB | |
| Gear.STL | 45.0KB | |
| Linkage.STL | 294.7KB | |
| Linkage_Pins.STL | 90.9KB | |
| Rack.STL | 89.9KB | |
| Steering_Assembly_Support.STL | 160.0KB | |
| Steering_Column.STL | 82.7KB | |
| Steering_Wheel.STL | 655.9KB | |
| Track_Left.STL | 134.2KB | |
| Track_Middle.STL | 163.7KB | |
| Track_Pins.STL | 45.8KB | |
| Track_Right.STL | 134.9KB | |
| Uni_Joint_Inner.STL | 58.3KB | |
| Uni_Joint_Outer.STL | 309.8KB | |
| Uni_Joint_Pins.STL | 155.4KB | |
| Wheel.STL | 801.4KB |
