Pizza Planet Rocket 3D Printer Model
The file 'Pizza Planet Rocket 3D Printer Model' is (obj,stl) file type, size is 3.5MB.
The file 'Pizza Planet Rocket 3D Printer Model' is (obj,stl) file type, size is 3.5MB.
This is a model of the famous Pizza Planet rocket from various PIXAR movies. I designed it to be printed without infill in the main rocket body.
I will make a magnetic base soon and will rotate the parts to the proper oriantations when I get around to it.
Enjoy
EDIT: I have corrected the orientation of the parts so you wont need to rotate them in your slicer.
EDIT: I've added a second tail section with filleted fins for lower overhangs. If you're printing with poor part cooling or materials that don't handle overhangs well use this version.
EDIT: I made up several magnetic bases using four and six 1.26" by 0.7" neodymium magnets as per suggestion by ProfessorMajack. I made the holes for the magnets slightly oversized, (I may improve the fit later once i have the magnets to test with) the idea being that the magnets will be epoxied in place. The four magnet version will be more forgiving for curved surfaces, but will not provide as strong a hold. Note: I have yet to print or test either of the magnetic bases.
EDIT: I have uploaded an OBJ of the base upon request by ProfessorMajack. Note: the OBJ of the base is upside down and will need rotated before printing.
| base.obj | 79.2KB | |
| base_2_300mm.stl | 525.4KB | |
| base_3_300mm.stl_magnetic.stl | 3.6MB | |
| base_4_300mm.stl_magnetic.stl | 3.1MB | |
| dowel.stl | 13.2KB | |
| Nose_2_300mm.stl | 3.5MB | |
| Tail_2_300mm.stl | 3.3MB | |
| Tail_3_300mm_filleted_fins.stl | 3.3MB |
![[OLD] SpaceX Starship SN8 3D Printer Model](https://res.3axis.co/c4921ac3-dfd7-416a-b797-7d78bb33e92d/images/028ce9fc-c920-48d3-b1b1-5feba85a4439_thumb.jpg)
