Hogwarts University 3D Printer Model
The file 'Hogwarts University 3D Printer Model' is (stl) file type, size is 1.3MB.
The file 'Hogwarts University 3D Printer Model' is (stl) file type, size is 1.3MB.
Here you have some almost perfect scale models of the buildings that are situated ontop of the Universal Studios Hogwarts ride. The bedrock files are the foundations that all the buildings can rest on. Enjoy this enchanted incredibly detailed print of the Hogwarts castle. If you need any help on the assembly you can message me. There are still a few peices for the west wing to rest on. There will be a secret drawer that pops out from under the Great hall.
There has been a hidden drawer update and it has a secret locking mechanism if you reach behind the bridge to depress the lever. I would suggest before printing you add some coin slots up top so you can double it as a bank. A new update about the rear of the great hall. There will be a small pool that you can fill with water and dry ice. It has spouts that will direct the fog to run down and around the rocks surrounding the buildings on the west wing. Filling up the crevice between the two sides of the school.
The Full scale model when finished will have a video i upload of the entire Project running and operating smoothly. There will be some led's inside the spiral spire that move up and down representing the kids going to and from their dorms. And yes it will be an amazing nightlight effect because the windows on that building are open to the internals. Please share your print photos.
| Bell_Tower.stl | 2.4MB | |
| Bell_Tower_Bedrock.stl | 273.1KB | |
| Bridge.stl | 125.5KB | |
| Classes_bedrock.stl | 13.0KB | |
| Classes_building.stl | 1.4MB | |
| Classes_coupler__bedrock_.stl | 22.1KB | |
| drawer_slide_left.stl | 4.4KB | |
| drawer_slide_right.stl | 17.7KB | |
| dry_ice_cap.stl | 33.4KB | |
| Great_Hall.stl | 336.5KB | |
| Great_Hall_Bedrock.stl | 212.6KB | |
| Great_Hall_Bedrock_bedrock.stl | 12.8KB | |
| Great_Hall_courtyard.stl | 129.7KB | |
| Great_Hall_Lower_bedrock.stl | 48.0KB | |
| Hidden_drawer_Rock_Top.stl | 7.7KB | |
| Hogwarts_drawer_face.stl | 270.4KB | |
| Hogwarts_Drawer_face2.stl | 270.4KB | |
| Left_side_inner_cover.stl | 29.8KB | |
| Movement_Brace.stl | 127.7KB | |
| Right_side_inner_cover.stl | 28.4KB | |
| Secret_drawer_latch_rt_side_placement.stl | 9.2KB | |
| Spiral_Cap.stl | 319.6KB | |
| Spiral_Spire.stl | 802.5KB | |
| Upper_Bedrock.stl | 288.3KB |
