A very simple chess set I designed after Pagan/Norse symbology. Pieces are all just shy of 50mm tall (Except the pawn, which is shorter), and 30mm in diameter at the base, so they should be compatible with most chess boards.
The symbols I used on each piece are; Knight (Valknut), Bishop (Pentacle), Queen (Yggdrasil), Rook (Wheel of the Year), King (Mjolnir). The Pawn was left blank. I marked all major pieces with their "chess" name on the back side so you can tell what is what without turning it.
I suggest printing with no larger than 0.1 layers due to the narrow lines in the pentacle.
The board prints as follows: 1 of each corner ("corn1" and "corn3" in one color, "corn2" and "corn4" in the other), 12 of each edge (6 of each color), and 36 of the core (18 of each color)...
--
If you like the design and want to support my work, throw me some crypto currency!
Bitcoin: 3QfkyjF3Z7KJcHvyb34GgPY8qAhSD3i31f
Bitcoin Cash: qzcadajt7mr5mw8ftp9s2evrd4q937n8qy603xgx86
Ethereum: 0x4659B82b3D729a60167b4E30d65858978AabA758
Litecoin: MT98VquYYbizC25fuRdx41XaWrVweykcwu
| bishop.stl | 1.3MB | |
| core.stl | 22.2KB | |
| corn1.stl | 46.4KB | |
| corn2.stl | 43.7KB | |
| corn3.stl | 42.2KB | |
| corn4.stl | 43.0KB | |
| edge1.stl | 22.5KB | |
| edge2.stl | 18.1KB | |
| king.stl | 839.6KB | |
| knight.stl | 1.4MB | |
| PaganChess.stl | 6.5MB | |
| pawn.stl | 443.8KB | |
| queen.stl | 1.4MB | |
| rook.stl | 1.1MB |
