Dual Slot MATX Case – Wall Mountable 3D Printer Model
The file 'Dual Slot MATX Case – Wall Mountable 3D Printer Model' is (stl) file type, size is 328.2KB.
The file 'Dual Slot MATX Case – Wall Mountable 3D Printer Model' is (stl) file type, size is 328.2KB.
This is a fully printable mATX case. Minimalist open air design with optional surface mounting, like a wall for example. NO HDD mount, designed to use m.2 drive. Will accept a full height video cards. Designed with loose tolerances for better results with different printers and materials.
Some assembly and gluing required - Read post printing note
REQUIRES A 300mm x 300mm print surface <<<<<<<<<<<
This case may not fit every configuration, if you wish to have a small modification or have suggestion for improvement, please leave a comment.
Happy printing
| Dual_Slot_mATX_-_Back_Corner.stl | 19.1KB | |
| Dual_Slot_mATX_-_Front_Corner.stl | 25.3KB | |
| Dual_Slot_mATX_-_Front_Panel_SF450.stl | 191.7KB | |
| Dual_Slot_mATX_-_Front_panel_Univ.stl | 177.6KB | |
| Dual_Slot_mATX_-_IO_Panel.stl | 201.5KB | |
| Dual_Slot_mATX_-_Long_Panel.stl | 115.9KB | |
| Dual_Slot_mATX_-_Long_Rail.stl | 4.0KB | |
| Dual_Slot_mATX_-_Motherboard_Tray.stl | 517.5KB | |
| Dual_Slot_mATX_-_PSU_Bracket.stl | 78.5KB | |
| Dual_Slot_mATX_-_PSU_Tray.stl | 148.0KB | |
| Dual_Slot_mATX_-_Short_Rail.stl | 3.8KB | |
| Dual_Slot_mATX_-_Stand_off.stl | 64.6KB |
