Advanced Web-Shooter With Magnet Holes 3D Printer Model
The file 'Advanced Web-Shooter With Magnet Holes 3D Printer Model' is (stl) file type, size is 145.1KB.
The file 'Advanced Web-Shooter With Magnet Holes 3D Printer Model' is (stl) file type, size is 145.1KB.
I printed OP's web shooters and just wanted to add magnets, so I put holes in the web shooter for 8mm diameter magnets, the holes are 8.1mm just for tolerances and can be slightly enlarged with sandpaper if needed. I highly recommend printing the web shooter vertically as the supports will be more forgiving, and you will achieve better quality.
The holes a 2mm deep not to pierce the web-shooter completely but you can add magnets up to 4mm tall since it's curved. I recommend making a bracelet with elastic fabric and sewing the magnets in.
The magnets' center points are 2cm apart
Also, it's been scaled down to 65% of OP's file, it was just way too big.
OP: original poster
| Insomniac_webshooter.stl | 321.8KB |
