Wine fridge labels designed to slip over the raised edge of the shelf. These were built for a Vinotemp EL-300GFEB wine fridge, but should work for other makes and models. The 10.65mm (0.42") gap between sides can be adjusted by scaling the print. Note that these were designed to use a single extruder with a filament change between files. See print settings section for more details.
| Beajolais_Bottom.stl | 89.5KB | |
| Beajolais_Top.stl | 90.9KB | |
| Bordeaux_Bottom.stl | 82.7KB | |
| Bordeaux_Top.stl | 83.7KB | |
| Burgundy_Bottom.stl | 94.0KB | |
| Burgundy_Top.stl | 95.4KB | |
| Cabernet_Franc_Bottom.stl | 104.8KB | |
| Cabernet_Franc_Top.stl | 106.7KB | |
| Cabernet_Sauvignon_Bottom.stl | 145.2KB | |
| Cabernet_Sauvignon_Top.stl | 147.9KB | |
| Chianti_Bottom.stl | 56.9KB | |
| Chianti_Top.stl | 58.7KB | |
| Grenache_Bottom.stl | 75.3KB | |
| Grenache_Top.stl | 77.0KB | |
| GSM_Bottom.stl | 66.1KB | |
| GSM_Top.stl | 67.3KB | |
| Hold_Bottom.stl | 56.9KB | |
| Hold_Top.stl | 57.9KB | |
| Malbec_Bottom.stl | 72.2KB | |
| Malbec_Top.stl | 73.3KB | |
| Merlot_Bottom.stl | 61.6KB | |
| Merlot_Top.stl | 63.0KB | |
| Nebbiolo_Bottom.stl | 89.5KB | |
| Nebbiolo_Top.stl | 90.5KB | |
| Petite_Sirah_Bottom.stl | 74.3KB | |
| Petite_Sirah_Top.stl | 76.4KB | |
| Red_Blends_Bottom.stl | 83.5KB | |
| Red_Blends_Top.stl | 84.8KB | |
| Rose_Bottom.stl | 72.9KB | |
| Rose_Top.stl | 73.9KB | |
| Sangiovese_Bottom.stl | 104.6KB | |
| Sangiovese_Top.stl | 106.7KB | |
| Shiraz_Bottom.stl | 66.7KB | |
| Shiraz_Top.stl | 68.1KB | |
| Single_Varietals_Bottom.stl | 95.6KB | |
| Single_Varietals_Top.stl | 98.5KB | |
| Super_Tuscan_Bottom.stl | 115.3KB | |
| Super_Tuscan_Top.stl | 117.5KB | |
| Syrah_Bottom.stl | 66.9KB | |
| Syrah_Top.stl | 68.1KB | |
| Tempranillo_Bottom.stl | 78.2KB | |
| Tempranillo_Top.stl | 80.2KB | |
| White_Bottom.stl | 47.2KB | |
| White_Top.stl | 48.7KB | |
| Zinfandel_Bottom.stl | 57.3KB | |
| Zinfandel_Top.stl | 59.3KB |
