Portal weighted/companion cube
Description
This is a remix from Ellindsey's design. I simply modified the faces to replace the heart by the Aperture logo.
Parts to print
For each cube, you need :
- white_edge.stl (x12) : ~2.5 hours
- white_corner.stl (x8) : ~4 hours
- grey_corner.stl (x8, with supports) : ~3.5 hours
For the Weighted Storage Cube :
- blue_face_aperture.stl (x6) : ~1.25 hours
- white_face_aperture.stl (x6) : ~1.5 hours
For the Weighted Companion Cube :
- pink_face_heart.stl (x6) : ~1 hour
- white_face_heart.stl (x6) : ~1.25 hours
Assembly
Glue not required.
- Print all the parts
- Put the gey_corners on the white_corners
- Snap these two by two with the white_edges
- Put the whitefaces<aperture/heart> on the <blue/pink>_faces
- Create two squares, each with two step 3 assemblies and a step 4 assembly
- On one of these squares, put white_edges on each corner
- Snap the two squares together
Print settings
Quality
- 0.2mm layer height with adaptive layers in Cura
- 10% infill (use 20% for the Companion cube if you want to respect the lore)
- 50mm/sec print speed
Supports
- With supports for the grey_corners
- Without supports for the other parts
- No raft
