This is model of human race Mage tower (Kingdom of Stormwind).
The model of the dice tower was redesigned using Autodesk Fusion software. The model is downloaded from the Word of Warcraft Dragonflight game using wow.export software.
There is a hole in the upper part of the roof for throwing in the dice.
The tower needs to be supplied with a PET bottle, from which the transparent part of the tower is made.
The tower is modeled so that the upper part can rotate and be correctly oriented above the entrance, just like in WoW. Therefore, the height of the PET bottle part of the tower does not matter. The number of steps depends on the height of the PET bottle.
The four highest steps have a cutout for easy cube dropping. They are named as: step1, step2, step3, step4. Step1 is the highest step, below it step2, etc. The next steps are step5-X, which lead down to the "base" part.
In the photos, the top of the tower (roof part) is different from what I uploaded to the files. I borrowed and modified the original part (roof v1) from a model whose license does not allow distribution. Therefore, I modeled a replacement part (roof v2).
The photos and the model of the entire tower (file all) will help you assemble the tower. Insert the "funnel" part into the "head" part, but do not glue it. Glue the "oring" part to the "head" part. This will allow the head of the tower to rotate.
Sorry for my English, but maybe you can build a tower based on this. :D
| alliance.stl | 881.3KB | |
| all_v2.stl | 36.8MB | |
| base_v1.stl | 4.2MB | |
| column_v1.stl | 1.2KB | |
| funnel_v1.stl | 274.9KB | |
| head_v1.stl | 23.7MB | |
| oring_v1.stl | 31.5KB | |
| roof_v2.stl | 1.0MB | |
| stair_axis_v1.stl | 32.7KB | |
| step1_v1.stl | 61.9KB | |
| step2_v1.stl | 262.8KB | |
| step3_v1.stl | 264.5KB | |
| step4_v1.stl | 266.9KB | |
| step5-X_v1.stl | 266.4KB |
