Wall Mount For Cricut Vinyl 3D Printer Model
The file 'Wall Mount For Cricut Vinyl 3D Printer Model' is (stl) file type, size is 39.7KB.
The file 'Wall Mount For Cricut Vinyl 3D Printer Model' is (stl) file type, size is 39.7KB.
This is a wall mounted rack/organizer for Cricut (or similar) vinyl rolls. They are designed to conserve as much time/material as possible while still firmly holding the vinyl roll in place and not letting it unwrap itself (the most annoying part of vinyl rolls!) Taking this is mind, they may flex down slightly while the vinyl roll is being inserted, but I have not had one break on me yet! Even with the material and print time savings, they still take quite a while to print (1 day and 9 hours or so to print 4 of them at once with .12 layer heights) so I would set your slicer settings for speed. They should be printed without supports as the only support that the slicer wants to add is a small tower support for the top curve of the screw hole which is not necessary.
| VinylRack_v11.stl | 140.1KB |
