Built from scratch, this design is based off the SR-PDW-K from SRU Precision. Differences-
-No exposed nuts (exposed nuts are tacky and cheap looking)
-sharper design edges (Less fillet, I'm more of a chamfer kind of guy)
-no logos
-built for g19 instead of g17
-added option of a pistol brace
-added option of a buffer tube adaptor (kind of awkward but the option is still there)
Current build is designed around a Polymer80 g19 with a Grey Ghost Precision slide.
Fitment may differ with different versions of frames. Regular g19 should fit with minor modification of the magwell.
Parts list
Reference render photo with colored bolts.
1 spring 10mm diameter 20mm length (stock release)
4 m3 18mm flat head-Red (front cap)
1 m3 30mm grub screw-Yellow (stock release)
4 m3 nuts-Red (front body)
9 m4 13mm flat head-Green (picatinny rails)
1 m4 36mm any style-Purple (frame hold down bolt)
4 m4 18mm button head-Blue (magwell)
2 m4 10mm any style-Orange (QD mount/rail stop)
1 m4 8mm any style (charging handle)
16 m4 nuts
2 m5 20mm any style-Light Blue (stock)
2 m5 nuts-Light Blue (stock rail)
| buffer_tube_adaptor.stl | 844.0KB | |
| charging_handle.stl | 84.3KB | |
| front_body_hole.stl | 122.4KB | |
| front_cap.stl | 91.4KB | |
| Grey_Ghost_Precision_cap.stl | 44.6KB | |
| mag_cap.stl | 42.9KB | |
| mag_well.stl | 188.2KB | |
| main_body.stl | 231.3KB | |
| new_top_rail_large.stl | 48.1KB | |
| p80_g19_handguard.stl | 36.4KB | |
| p80_magwell_g19.stl | 261.5KB | |
| pistol_brace_v1.stl | 116.5KB | |
| rail_stop.stl | 19.0KB | |
| Read_me.txt | 1.2KB | |
| short_mag_well.stl | 192.7KB | |
| short_p80_g19_handguard.stl | 36.6KB | |
| side_rail.stl | 40.7KB | |
| split_body_front.stl | 118.5KB | |
| split_body_rear.stl | 138.2KB | |
| split_stock_rail_1.stl | 17.2KB | |
| split_stock_rail_2.stl | 18.2KB | |
| stock.stl | 177.3KB | |
| stock_rail.stl | 23.5KB | |
| stock_release.stl | 30.1KB |
