With the new season coming up, I realized a wanted a something physical from the show. This model was designed from the beginning for 3d printing. Parts are rotated for best printing. Glue will be necessary for assembly. I've found Starbound CA glue to be excellent.
I tried to scale it to 1:1400 but I was working off of an old length of around 530m. Instead the new length is 794m which puts this model more at 1:2080. Constructed length is 382mm (~15in) so it is still pretty large. The saucer is about 200mm wide alone.
IMPORTANT: Mirror parts. I have only included one side for each component. For the other side they will need mirrored.
I have printed it and tested all parts fitment.
| Deflector_Dish.stl | 1.2MB | |
| Engineering_hull.stl | 1.9MB | |
| Engineering_hull_Joiner.stl | 684.0B | |
| Nacelle_Front_Cylinder.stl | 816.6KB | |
| Nacelle_Front_Nose.stl | 285.4KB | |
| Nacelle_Rear.stl | 3.9MB | |
| Saucer_Half.stl | 13.1MB | |
| Saucer_Joiner.stl | 89.9KB | |
| Torpedo_Launcher.stl | 51.6KB | |
| USS_Cerritos_v56.step | 40.1MB | |
| Vertical_Support.stl | 2.5MB |
