Underdesk -or Anything- Mini Drawers (and More) 3D Printer Model
The file 'Underdesk -or Anything- Mini Drawers (and More) 3D Printer Model' is (stl) file type, size is 21.8KB.
The file 'Underdesk -or Anything- Mini Drawers (and More) 3D Printer Model' is (stl) file type, size is 21.8KB.
These are some mini drawers that you can stick (or screw) under any table that has enough clearance (22.2mm). The big one is big enough to keep an Arduino mega (110.4 x 57.4mm) and the small one an uno (82.4 x 57.4mm).
I found easier to stick the hangers with double sided tape so I gave them enough top surface to have a strong bond.
There are two kinds of handles, one flat and one that you can open pulling with a finger.
I also made an "on desk" holder for 5 mini drawers and some separators that you can see in the pictures.
Left and right side hangers are almost optional because you can use the center hanger for everything (in fact, it was the first I designed and used).
That's it.
| bf.stl | 10.9KB | |
| center_h.stl | 35.6KB | |
| draw_big_f.stl | 5.7KB | |
| dr_big.stl | 3.6KB | |
| dr_small.stl | 3.6KB | |
| dr_small_f.stl | 5.7KB | |
| left_h.stl | 17.9KB | |
| right_h.stl | 18.0KB | |
| sep_big.stl | 3.8KB | |
| sep_small.stl | 5.4KB |
