my motivation for this:
I got really annoyed of all those wash station concepts with plastic or metal parts in (like "under water") the IPA. the parts got always wet and sticky cause of the resin, and you always have to clean them after cleaning. thats quite ironical.
im also not a fan of the hanging constructions where you have to mount the build plate on a second linear rail and then submerge them into the IPA.
so i wanted a very simple and effectiv construction to submerge ONLY the printed parts and the buildplate and thats what i thougt of: a simple stamp that goes quickly into the build plate mount.
with the new series of elegoo SLA printers thats very easy cause they dont use a screw for tightening.
for the horizontal bar i ordered a simple stainless steel square bar on amazon but you could also use a piece of wood or anything else.
the holes in the stamp are 10x10mm and the bar is 8x8mm.
for the wash containers i took two big boxes from ikea with 32x21x23
https://www.ikea.com/de/en/p/ikea-365-food-container-with-lid-rectangular-plastic-s79276760/
have fun printing =)
| wash_stamp.stl | 10.6KB |
