The GlenCairrier 3D Printer Model
The file 'The GlenCairrier 3D Printer Model' is (stl) file type, size is 10.6MB.
The file 'The GlenCairrier 3D Printer Model' is (stl) file type, size is 10.6MB.
This is storage solution that can hold up to 16 Glencairns or similarly shaped glasses. Included in this project is a mini-glencairn adapter.
In the four corners of the lid and container body are holes where 5x2mm magnets can be inserted to secure the lid better (eight magnets used in total).
I printed this on a Bambu Lab P1S so I had to chop the bigger parts into four pieces. This is why there is a file called Lid_Brace.stl. It sits in the middle of the lid to stabilize the 4 pieces. Affix using your preferred PLA bonding material (I used CA glue).
As for print settings, 10% Rectilinear infill worked well for me. The MiniCairn Adapter.stl piece could use supports, there is some overhang.
| Body.stl | 19.0MB | |
| Lid-Brace.stl | 31.1KB | |
| Lid.stl | 1.4MB | |
| MiniCairn_Adapter.stl | 5.8MB | |
| name-stencil.stl | 537.4KB |
