A model of a TARDIS, designed so as to make it easy to split & print as coasters.
Each piece is labelled as "top", "middle" or "bottom" to help you figure out where they fit together. "A" pieces go lower than "B", etc. The "x2" or "x5" or whatever indicates how many times to print that piece. In the end, you should have 27 pieces - not the roundest number, but it's what was needed to get everything to both look good and line up properly.
There are 2 versions of the 12 "panel" pieces because not all cups/mugs fit into holes on coasters. I recommend printing the "no hole" set for these so that you have 12 coasters to use with oversized mugs.
| tardis_coasters_-_bottom_A_flat.stl | 13.2KB | |
| tardis_coasters_-_bottom_B_angle.stl | 21.1KB | |
| tardis_coasters_-_middle_panels_NO_HOLE_x12.stl | 20.2KB | |
| tardis_coasters_-_middle_panels_x12.stl | 26.1KB | |
| tardis_coasters_-_middle_plain_x5.stl | 19.4KB | |
| tardis_coasters_-_middle_windows_A_x2.stl | 38.2KB | |
| tardis_coasters_-_middle_windows_B_x2.stl | 46.0KB | |
| tardis_coasters_-_top_A_large_x2.stl | 19.2KB | |
| tardis_coasters_-_top_B_medium.stl | 13.2KB | |
| tardis_coasters_-_top_C_lantern.stl | 29.2KB |
