Battletrap's gun from Rise of the Beasts. This version of the gun is based off of what is seen in one of the most recent trailers. This gun is designed for the Studio Series Battletrap figure to make up for his lack of weapons and to make it more accurate to the film.
It's designed to be printed in 4 parts that all get glued together. It does work on filament printers (which is what I used in the pictures), but printing it in resin will yield the best results. The 5mm port should pop right into the Studio Series Battletrap's hand, but may need slight sanding if not. The gun, specifically the base (gun_four) is designed to fit onto the right hand. You'll have to mirror the file if you want one for the left hand.
The paint I used was what I had laying around, which was a gundam marker for the greys, a Molotow marker for the silvers, and some apricot acrylic for the orange.
| Battletrap_gun_whole.stl | 1007.6KB | |
| BttlTrp_gun_four.stl | 437.4KB | |
| BttlTrp_gun_one.stl | 294.4KB | |
| BttlTrp_gun_three.stl | 256.8KB | |
| BttlTrp_gun_two.stl | 72.2KB |
