I used the original "Heavy Duty Coat Hanger for a door" as an inspiration for this version. I made this one fit a 'normal' solid-core wood door (which are typically 1-3/4" thick door slabs) to work over the door in my office.
It is pretty strong, as it holds my very heavy Carhartt (brand) long winter coat without any issues.
I also put a pair of holes through it near the top, in case someone felt the need to 'tack' it in place to stop it from sliding around.
| 1.75inch_Door_Coat_Hanger.gcode | 2.5MB | |
| 1.75inch_Door_Coat_Hanger.STL | 184.4KB |
