This is a midgrade version of the Phaser II pistol from the original Star Trek series. It has a working latch to retain the Phaser I, but apart from that the knobs and trigger aren't made to be functional.
The model is split into multiple sections for best printing results, and for ease of painting. Some assembly is required. (Okay, a lot of assembly is required.) Some parts which make a single unit ("Ten Turn" knob, side knob, rear fins) are STLs which contain multiple models.
Two optional wall plaques are included (for displaying the phaser pointing in either direction), designed to be affixed to the wall with 3M Command Strips.
Additional Note: I call this one "Midgrade" because it's mostly nonfunctional, but design-wise it more closely resembles the hero P2 (separate rear fins, ten-turn knob, etc.). I'll eventually be adding the early first season version, which was repainted and slightly updated for use as the actual midgrade P2 body.
| P2_Body_-_Left.stl | 1.5MB | |
| P2_Body_-_Right.stl | 1.1MB | |
| P2_Emitter.stl | 88.0KB | |
| P2_Fin_Block.stl | 3.0KB | |
| P2_Front_Clip_with_Supports.stl | 26.4KB | |
| P2_Latch_Spring.stl | 22.9KB | |
| P2_Nozzle.stl | 1.0MB | |
| P2_Nozzle_Retainer.stl | 105.6KB | |
| P2_Power_Pack.stl | 250.2KB | |
| P2_Power_Pack_End.stl | 228.1KB | |
| P2_Power_Pack_End_Cover_Plate.stl | 166.5KB | |
| P2_Rear_Fins.stl | 149.6KB | |
| P2_Release_Button.stl | 70.1KB | |
| P2_Side_Knob.stl | 256.5KB | |
| P2_Ten_Turn.stl | 255.4KB | |
| P2_Trigger.stl | 56.1KB | |
| P2_Wall_Plaque.stl | 180.0KB | |
| P2_Wall_Plaque_-_Facing_Right.stl | 181.1KB | |
| P2_Window.stl | 6.1KB |
