Hey everyone! This is a remix of a bunch of other people's designs. I wanted something a little more detailed and screen accurate before Infinity War, so I threw something together quickly, so sorry if it seems a bit sloppy at the moment, hopefully I'll have time to come back and improve upon it later! It is meant to be the webshooters from "Spider-Man: Homecoming", from Peter's homemade suit near the end of the film. In my humble opinion, this design is currently the most detailed currently on Thingiverse for free, but if you are having any issues with the files please let me know!

For one complete webshooter, you're gonna need to print the following:

2x Cartridges.stl
1x Webshooter.stl
1x Smaller Band.stl
1x Larger Band.stl
1x New Trigger.stl

If you are trying to build a complete set of two webshooters you're going to have to print twice the amount. After printed, clean and paint the prints, and hot glue the parts together in a similar fashion to the movie to a red wrist sweatband. The bands should be glued to the back of the webshooter, and the trigger should be glued to the top of the webshooter (the two pillars should be glued to the two rectangular portions on the top of the webshooters, and the flat rectangular portion of the trigger should be glued to back of the webshooters). I spray painted mine black and then metallic silver and hot glued pieces of a thick wire I had laying around. Feel free to do whatever you'd like though, as this is not a functional print and is purely for aesthetic.