Speakon Female D-Size Box/Housing NL4MD-H 3D Printer Model
The file 'Speakon Female D-Size Box/Housing NL4MD-H 3D Printer Model' is (stl) file type, size is 2.7MB.
The file 'Speakon Female D-Size Box/Housing NL4MD-H 3D Printer Model' is (stl) file type, size is 2.7MB.
Housing for a D-Size Speakon (female) Connector with holder.
Use a Maximum of 0.1Resolution for the Squeezable-Parts!
The Holes at the Holder are 3.3mm.
The gap between the Holdingplates is 2mm. Only on "SpeakonBodyRightSideHolder.stl" it is 1mm!
Use screws: 3mm x 10mm to get the plug and the Cover fixed
Maximum Cable-Diameter for the Covers is 8mm!
Ask me for more solutions of the holder...
I use the Speakon-Connectors in my Camping-Caddy. The wooden Boxes i build for the Camping interior are also with Light etc.. To get the boxes in Wintertime out of the Car i searched a solution to do this in a save and easy way. So i found the Speakon-Connectors. If you want to use it for this u should be sure the Ampere is not to high for this connectors!!! I only have small things on it like LED-Lights and a Chargers for Handy and GoPro etc...
| SpeakonBodyLeftFullHolder.stl | 1.7MB | |
| SpeakonBodyLeftHolder.stl | 1.8MB | |
| SpeakonBodyRightHolder.stl | 1.8MB | |
| SpeakonBodyRightSideHolder.stl | 1.8MB | |
| SpeakonCover2Holes.stl | 3.9MB | |
| SpeakonCover4Holes.stl | 4.1MB | |
| SpeakonSqueezeCover2Holes.stl | 4.6MB | |
| SpeakonSqueezeCover4Holes.stl | 4.7MB | |
| SpeakonSqueezeNut.stl | 8.4MB |
