Small Items Drawer (With Label Inserts) 3D Printer Model
The file 'Small Items Drawer (With Label Inserts) 3D Printer Model' is (stl) file type, size is 5.1MB.
The file 'Small Items Drawer (With Label Inserts) 3D Printer Model' is (stl) file type, size is 5.1MB.
Update (2018-06-16) - Design improvements for better grabbing, and notches that keep the drawers from falling out.
This is a little drawer for putting your screws, electronic bits, or various other small objects into.
You can insert labels into slits on the drawers and they will be visible in the circular "windows".
To print this at 100% scale, you need a print volume of at least 120.8 x 120.8 x 60 millimeters.
The drawers are approximately 30 millimeters wide/tall, and 60 millimeters long.
The paper label inserts should be approximately 22 millimeters wide and 20 millimeters tall.
The tolerance for the sliding mechanism is 0.4 millimeters. While this is quite generous, be sure that your printer is capable of it before spending several hours printing this.
Leave a message if you have any suggestions, complaints or comments!
| Drawer_Label_V5.stl | 2.3MB | |
| Main_V3.stl | 23.5MB |
