The file 'Small Case With Working Clip Mechanism 3D Printer Model' is (STL) file type, size is 314.4KB.
I designed a small case that is prinable on the Anet A8's Printbed.
It was designed to be used as an Airsoft case, which is why there are images with the PPQ lettering on the top. I also designed a plane grey version which can be used without the text or can be individualised.
The cips and hinches are working, but you will need an m3 threaded rod (or mashine screw) and m3 nuts to install it.
Inside: Width: ~185 mm, Height: ~44 mm (with 30 mm in the lower half), Depth: ~145 mm
Outside: Width: ~200 mm, Height: ~55 mm, Depth: ~180 mm
The measurements were taken on one of my printed cases. I will look up the exact dimensions in my solidworks file and will add them later.
ClipConnector_Print2.STL | 34.8KB | |
Clip_Print2.STL | 71.8KB | |
LowerHalf.STL | 358.5KB | |
TextInlay_OnlyNeededForPPQCase.STL | 88.4KB | |
UpperHalf.STL | 250.3KB | |
UpperHalfTextCutout_OnlyNeededForPPQCase.STL | 331.5KB |