Simple Smart Window Opener V2 ESP8266 Powered 3D Printer Model
The file 'Simple Smart Window Opener V2 ESP8266 Powered 3D Printer Model' is (stl,yaml,dxf) file type, size is 42.2KB.
The file 'Simple Smart Window Opener V2 ESP8266 Powered 3D Printer Model' is (stl,yaml,dxf) file type, size is 42.2KB.
"It will open your window slowly but surely""
This is a simple smart-home window opener which is low cost and easy to build.
This design needs to be screwed to the top of your window, the intention was to
leave no visible screw holes when removed in the future.
The main target for construction was to use old parts laying around, the motor is quite slow with the m6 rod.
I also recommend to use a modern stepper driver that is less noisy then the old A4988.
Parts needed:
-Printed parts: coupler, nut-holder, case
-Laser-cut parts(cut from 5mm material)
-M6 Rod & Nut
-M3 Screws and nuts
-Nema 17 motor
-Wemos D1 Mini or other small ESP8266
-A4988 or compatible stepperdriver
-Stepdown for ESP
-12v PSU
| case_v2.stl | 60.5KB | |
| config.yaml | 1.3KB | |
| Coupler_v2.stl | 263.2KB | |
| laser_5mm.dxf | 204.6KB | |
| nut_v2.stl | 77.6KB |
