Please note that this design includes only the modified base, I did not change the clamp part which you can find in the original design here: https://www.thingiverse.com/thing:4764952
The original design had an issue with cables that were being pull from the side.
Since my vacuum for example could sometimes get stuck on cables I decided to do this remix.
By adding the 2 pieces on each side of the base the force of sideways pulls will be applied to the base instead of the clamp. This way the clamp wont fall off when the cable is pulled sideways.
This design is not optimized at all. I just added the 2 additional pieces very roughly without trying to save on material or anything. I will only use a limited amount of them and it is a small print.
Maybe it helps somebody :)
Edit: kmartin25 made a more optimized version (the side pieces align better with the clamp and use less material) but I have not tested this myself. You can find it here: https://www.thingiverse.com/thing:6459136
| Optimized_Base.stl | 332.0KB | |
| Optimized_Base_Wrong_Scale.stl | 332.0KB |
