[UPDATE 2020-04-02]
Renamed the file to make the sizing easier to understand
Added the 0.5 x 0.3 box
[/UPDATE]
This is a small parts tray with a large variation of boxes.
Tray size: 24cm x 19.5 cm. This means your print bed needs to be at least 24.5 x 20 cm large. Otherwise you cannot print with a brim.
There are a variety of boxes included. The naming for the boxes assumes that the width of the half-tray (left/right side of the central barrier) is equal to 1.
Full-height box, width 1, 1/2, 1/3rd
Half-height box, width 1/2
2/3rd height box, width: 2/3rds, 1/3rd
1/3rd height box, width 2/3rd, 1/2.
So 8 different sizes in other words. Please refer to the photo for the different options.
This is a revised version of Screw / small parts case (large)
While the old version was built to max out the space on a Prusa MK3S bed, this one is made for flexibility and only 5mm shorter than the previous one. In this version, the try length is exactly 2.5 x the half-tray width.
The small square boxes from the previous version will fit in there. All the boxes from this version also fit into the old tray provided that you keep the 2 large boxes from the old version.
The boxes also have better designed bends that print much cleaner.There is also a larger variety of boxes included.
See the nicer corners of the boxes on the left vs, the old version on the right.
| Box_0.3_x_0.3.stl | 28.0KB | |
| Box_0.5_x_0.3.stl | 28.3KB | |
| Box_0.5_x_0.5.stl | 28.3KB | |
| Box_0.6_x_0.3.stl | 28.4KB | |
| Box_0.6_x_0.6.stl | 28.2KB | |
| box_03_x_03-half-height-stackable.stl | 48.8KB | |
| box_03_x_03-labeled.stl | 29.0KB | |
| box_05_x_03-labeled.stl | 28.9KB | |
| box_05_x_05-labeled.stl | 28.7KB | |
| box_06_x_03-labeled.stl | 28.7KB | |
| box_06_x_06-labeled.stl | 28.6KB | |
| Box_1_x_0.3.stl | 28.6KB | |
| Box_1_x_0.5.stl | 28.1KB | |
| box_1_x_03-labeled.stl | 29.2KB | |
| box_1_x_05-labeled.stl | 28.7KB | |
| box_1_x_1-labeled.stl | 28.9KB | |
| Box_1_x_1.stl | 28.2KB | |
| tray-stackable.stl | 73.0KB | |
| Tray.stl | 61.2KB |
