Rummy Tile Holder (standard Size) With Print-in-place Foldable Legs 3D Printer Model
The file 'Rummy Tile Holder (standard Size) With Print-in-place Foldable Legs 3D Printer Model' is (f3d,3mf,stl) file type, size is 584.7KB.
The file 'Rummy Tile Holder (standard Size) With Print-in-place Foldable Legs 3D Printer Model' is (f3d,3mf,stl) file type, size is 584.7KB.
This is a tile holder for rummy (or any other game with similar tile size), which, instead of the normal inserted legs, has foldable legs.
Since the holder is too long (~33cm) for the MK3 bed, I have split it in two, such that one part is inserted into the other, and glued in place. The seam can then be attenuated by various techniques, What I did was using a 3D printing pen pressed against the seam with the same filament, then I sand it, and cover it with some petroleum jelly for 24 hrs (restores partially pla color), then clean it with a humid cloth.
The foldable legs are printed in place, attached to the body.
I included the original Autodesk Fusion model so you can easily modify it if you want to, for example, print it in one piece if you have a bigger printer.
Printed on an i3 MK3S+, 0.3mm layer height, with PLA.
The model is thin, so the corners tend to lift, so I added sacrificial geometry at the tips and provided 3MFs files for it.
| Rummy_tile_holder.f3d | 276.3KB | |
| Rummy_tile_holder_left_half.3mf | 106.7KB | |
| Rummy_tile_holder_left_half.stl | 251.8KB | |
| Rummy_tile_holder_right_half.3mf | 110.0KB | |
| Rummy_tile_holder_right_half.stl | 277.8KB |
