IMPORTANT NOTICE
You will need to adapt the "lamp_clamp.stl" model to match your lightbulb. The fins are glued to the chassis and the rest is held together by the exhaust screws. If the tip of the rocket won't turn out well, then print just the tip and glue it back atop.
| chassis.stl | 212.9KB | |
| exhaust.stl | 23.8KB | |
| fins_bottom.stl | 26.6KB | |
| lamp_clamp.stl | 43.3KB | |
| tip.stl | 1.5KB |
