Post-Apocalyptic Deathrace Tank [Gaslands] 3D Printer Model
The file 'Post-Apocalyptic Deathrace Tank [Gaslands] 3D Printer Model' is (stl) file type, size is 32.5MB.
The file 'Post-Apocalyptic Deathrace Tank [Gaslands] 3D Printer Model' is (stl) file type, size is 32.5MB.
A post-apocalyptic tank designed for use in Gaslands, based on an E-100 chassis.
I'm not sure about the sizing, you may need to tweak up or down to suit the rest of your miniatures and terrain.
There is an alternate turret rear that has no wrecking ball if you don't like the look.
You can find the wrecking ball separately if you'd like to add it into any other vehicles.
https://www.thingiverse.com/thing:4302435
I've used a bunch of various parts and have tried to capture them all in the remix field but I may have missed some, apologies if so.
Notable is h0unskull's stuff which has a no derivatives license though I've messaged him and believe he will be ok with me just linking his great work below:
https://www.thingiverse.com/thing:3016263
https://www.thingiverse.com/thing:3001051
https://www.thingiverse.com/thing:3000995
Assembled Dimensions (Approx):
Including all accessories (bayonet to wrecking ball) - L145mm x W55mm x H50mm
Body and turret only - L95mm x W55mm x H40mm
I have uploaded a "full model" to play with the size but I wouldn't recommend printing that way. It is also a large file at around 80mb.
| Tank_Body_Front.stl | 5.9MB | |
| Tank_Body_Rear.stl | 1.5MB | |
| Tank_FullModel.stl | 81.4MB | |
| Tank_Ram.stl | 15.1KB | |
| Tank_Tracks_Left.stl | 6.0MB | |
| Tank_Tracks_Right.stl | 890.8KB | |
| Tank_TurretTopper.stl | 2.8MB | |
| Tank_Turret_Front.stl | 1.2MB | |
| Tank_Turret_Rear_NoWreckingBall.stl | 3.8MB | |
| Tank_Turret_Rear_WreckingBallMount.stl | 3.0MB | |
| wreckingball_arm.stl | 669.9KB | |
| wreckingball_ball.stl | 278.2KB | |
| wreckingball_chain.stl | 534.0KB |
