A plate/tablet stand with stabilizers, there are two versions one you Glue and the other using M3 Screws, if it is too big I have also printed at 80% and you can still tap the M3 screws.
NOTE: it will work as a tablet stand but be careful it will slide out (if knocked) if the tablet is not in a case.
I used 3 perimeters and 15% infill
| GLeft.stl | 20.4KB | |
| GRight.stl | 20.4KB | |
| GStablizer_01.stl | 3.8KB | |
| GStablizer_02.stl | 3.8KB | |
| SLeft.stl | 103.0KB | |
| SRight.stl | 82.1KB | |
| SStablizer_01.stl | 27.2KB | |
| SStablizer_02.stl | 27.2KB |
