NASA Saturn V Kit Card 3D Printer Model
The file 'NASA Saturn V Kit Card 3D Printer Model' is (stl) file type, size is 1.3MB.
The file 'NASA Saturn V Kit Card 3D Printer Model' is (stl) file type, size is 1.3MB.
The Saturn V rocket miniature model developed by NASA to take astronauts to the moon. Some details were omitted due to how small they were or poor results after slicing. Available in both multicolor and single color. The rocket can stand vertically without any support once assembled.
The antenna is pretty small, be careful when removing from the kit. When pushing the antenna through the third stage, you can cut the tip off if needed. Do not cut the side that prevents the antenna from going through the third stage (the side that has an extra extrusion closest to the Saturn V label). Once the antenna is through the third stage, you can give it light tug to secure it in place.
| Antenna.stl | 77.2KB | |
| Cap1.stl | 92.3KB | |
| Cap2.stl | 92.3KB | |
| Cap_Connect.stl | 105.4KB | |
| Engines.stl | 266.7KB | |
| Main_Left.stl | 838.3KB | |
| Main_Right.stl | 873.0KB | |
| SaturnV_KitCard_v20.stl | 2.2MB | |
| SC-IC_To_SII.stl | 213.4KB | |
| SII_Left.stl | 218.0KB | |
| SII_Right.stl | 218.0KB | |
| Stand.stl | 276.6KB | |
| Top.stl | 154.0KB |
