Naboo Fighter N1 3,75″ Action Figure Scale 3D Printer Model

Author: @
License: CC BY-NC-ND
File formats: stl
Download type: zip
Size:18.6MB

The file 'Naboo Fighter N1 3,75″ Action Figure Scale 3D Printer Model' is (stl) file type, size is 18.6MB.

Summary

[update 17.3.22: Made a stand for the model https://www.thingiverse.com/thing:5320813
Added a multicolour version of the Cockpit canopy. Frame+ separate window. Cut out the cross in the frame after printing,its only to get a stable printing. Youhave to glue these two parts.
Added split parts for 6" printing on smaller printers. ]

[update 14.3.22: Uploaded 3 Files for a Multicoloured R2 Unit. Just print the 3 files marked with a "MC" after the "NA" in the colours you like instead of the normal"NA Cockpit" file with has the R2 Unit in it]
A detailled Modell for 3,75" action figures (suitable for 6" when printed at 160% size) from the N1 Naboo fighter in the original version as seen in Episode 1/2.
No action figures included.
Canopy slides open just like in the film.

Find the mandalorian version here: (uploaded it again)

https://www.thingiverse.com/thing:5338197

With new connection system! You don´t need to glue the parts. But be warned: If fitted together with the connectors installed you probably can´t separate them again.

If you like my models consider giving me a tip, I support children in need with the money. And please give the model a like.

Printing instructions:
Needs a printer with 20x20 Print bed (30x30 vor 6" version) Print at 160" if vou want a version for 6" figures. Print all parts except the Tail without supports! For the tail activate "supports/Touching built plate only"! Print all files in the already placed position. No need to turn them in Cura. Recommended is 0.2 layer and 15-20% infill. There are two versions for the canopy. One with the windows modelled and one without the clear parts. print the version you want.

Legal stuff:

BY DOWNLOADING THE FILES FROM THINGIVERSE YOU AGREE TO THE FOLLOWING TERMS AND CONDITIONS:
The files are for private use only!
You are allowed to print parts from them for your personal use only!
You are not allowed to use this files or parts you printed with the use of this files of it in any comercial way!
If you are distributing Pictures from parts or models you build with theses files you are only allowed to to so if you are declaring the source of the design. You have to add a link to this thingiverse-thing in the description of your Fotos!
You are not allowed to copy or distribute them in any way!
You are not allowed to sell them or parts you printed from them or models you build with the use of this files!

N1_Connector_1.stl 107.3KB
N1_Connector_11.stl 1.2MB
NA_Body.stl 8.9MB
NA_Canopy_Full.stl 1.1MB
NA_Cockpit.stl 4.3MB
NA_Engine_LF.stl 811.8KB
NA_Engine_RB.stl 718.2KB
NA_Engine_RF.stl 811.7KB
NA_Engine_RL.stl 718.2KB
NA_MC_Canopy.stl 660.1KB
NA_MC_Canopy_Window.stl 335.2KB
NA_MC_Cockpit.stl 3.8MB
NA_MC_R2.stl 835.5KB
NA_MC_R2_inside.stl 383.1KB
NA_Nose.stl 4.9MB
NA_Split_Body_L.stl 6.8MB
NA_Split_Body_R.stl 2.1MB
NA_Split_Nose_L.stl 3.4MB
NA_Split_Nose_R.stl 1.5MB
NA_Tail.stl 699.8KB