This is a modulized frame (or a shelf you may say) which use 3 mm MDF as arms and 3d-printed connectors.This shelf was made to keep coffee gears in order at the first place, which means I might need to make a new one with Acrylic instead of MDF.
This was mainly designed with "Configuration" function Onshape provided. That is, some sizes are adjustable. I also made a short video showing how to adjust them, but I am actually new to CAD, so any advice is appreciated.
這是一個模組化的骨架，或者說是架子。骨架使用3 mm厚的密集板製作，配合3D列印的關節。最初製作的動機是要想辦法收納泡咖啡的用具，所以之後可能還會再用壓克力重新做一個。
主要利用OnShape的Configuration功能來設計，因此有一些尺寸是可以調整的。我有做了一個簡單的說明影片，介紹了如何進行調整。不過，我本身還是使用CAD軟體的新手，也請大家不吝指教。
=Related Video 相關影片=
-How I made it 製作過程:
https://youtu.be/26PL8f9jTrE
-How to Use "Configuration" with Onshape 如何使用Onshape的Configuration功能:
https://youtu.be/PFyCJ8APbRQ
| 110Arm.dxf | 48.1KB | |
| 120Arm.dxf | 48.1KB | |
| 160Arm.dxf | 48.1KB | |
| 180Arm.dxf | 48.1KB | |
| 303Arm.dxf | 48.1KB | |
| 90Arm.dxf | 48.2KB | |
| ArmVarForGrinder.dxf | 52.8KB | |
| TankArm.stl | 594.8KB | |
| way_Connector.stl | 4.3MB |
