The file 'Modular Space Station 3D Printer Model' is (stl) file type, size is 3.4MB.
A 1/200 scale modular DIY space station inspired by Skylab that uses 5mm x 2mm magnets to connect the parts. These magnets can be found on ebay (100x for around $4 USD), that can then be glued into place with superglue.
A couple of the parts are split up into two so you shouldn't need supports, but in that case will require a dab of superglue. Pay attention to the orientation of the magnets before you glue them!
Also included is an Apollo CSM inspired spacecraft, and a Soyuz inspired spacecraft, split up so they shouldn't require any supports.
These are not a perfect recreation of the historical spacecraft, instead they are a bit more printer friendly.
The bits and pieces can be combined in a variety of different configurations like legos, so the possibilities are endless!
Anyone who wants to make their own compatible addons are encouraged to! Only request is that the 5mm x 2mm magnet is used as the standard for docking points and attachments to make it easier for people to assemble.
Below are links to the Fusion360 files that can be saved to use as a starting point for creating your own components and mods. Password is 123456
The download link is in the upper right hand corner so you can open in Fusion360
Apollo CSM Style Capsule: https://a360.co/2OwcBvn
Soyuz Style Capsule: https://a360.co/2L3LQMK
Skylab Style Station: https://a360.co/2R1nB5I
Basic_Solar_Panel.stl | 105.2KB | |
Fauxpollo_Capsule_Bottom.stl | 1.3MB | |
Fauxpollo_Capsule_Top.stl | 100.1KB | |
Fauxpollo_Service_Module_Bottom.stl | 1.5MB | |
Fauxpollo_Service_Module_Top.stl | 1.5MB | |
Hole_Filler_-_Airlock_Hatch.stl | 93.3KB | |
Hole_Filler_-_Coupla.stl | 130.1KB | |
Magnet_Reverser.stl | 216.7KB | |
Soyuz_Style_Capsule.stl | 2.2MB | |
Soyuz_Style_Orbital_Module.stl | 1.0MB | |
Soyuz_Style_Service_Module.stl | 617.2KB | |
Soyuz_Style_Solar_Panel.stl | 36.0KB | |
Station_-_Docking_Hub.stl | 300.5KB | |
Station_-_Extension.stl | 125.3KB | |
Station_-_Interface.stl | 116.3KB | |
Station_-_Main_Body.stl | 1.2MB | |
Station_-_Plain_Endcap.stl | 155.8KB | |
Station_-_Rotating_Bit_1.stl | 156.5KB | |
Station_-_Rotating_Bit_2.stl | 164.8KB | |
Station_-_Scalloped_Endcap.stl | 204.9KB |