Minix Neo x8-H plus wall mount.
You can use double side tape or screws.
You will need to take the HDMI out to insert the Minix.
I have printed it with ABS and the MINIX X8 holder Ver3 right size is the one for me .
If you need there is an older version MINIX X8 holder Ver2 1.5 mm smaller that is 1.5 X and 1.5 Y smaller.
Print it with support.
I will ad an IR mirror later
Thanks
| MINIX_X8_holder_Ver2_1.5_mm_smaller_.STL | 1.3MB | |
| MINIX_X8_holder_Ver3_right_size_.STL | 1.3MB |
