Miniature Paint Shelves 3D Printer Model
The file 'Miniature Paint Shelves 3D Printer Model' is (stl) file type, size is 3.4MB.
The file 'Miniature Paint Shelves 3D Printer Model' is (stl) file type, size is 3.4MB.
edit; Ran the files through netfabb to make them less poopy. Hopefully anyone who had issues with them will now no longer have issues with them.
Miniature paint bottle holders I made to hold multiple brands and to either be wall mounted or angled and stand on desk. Very similar to stuff that's already out there but I wanted something that could hold multiple paint brands and still look cohesive. I print these at 101% just because I don't like sanding the holes down to make the whole thing fit together. but as long as your tolerances are good they should fit together pretty snugly. The shelves themselves get pretty thin at points i would also recommend either more walls or a higher infill than usual for these. I Hot glued mine together, which I highly recommend you do too if you decide to print this.
| 45degree_stand_fixed.stl | 57.7KB | |
| Back_fixed.stl | 886.8KB | |
| Citadel_Shelf_fixed.stl | 3.2MB | |
| Citadel_short_bottle_Stool_fixed.stl | 151.4KB | |
| Golden_Shelf_fixed.stl | 3.1MB | |
| Sides.stl | 184.2KB | |
| Vallejo_Shelves_fixed.stl | 2.8MB |
