Miniature Buildings For Giant Robot Diorama 3D Printer Model
The file 'Miniature Buildings For Giant Robot Diorama 3D Printer Model' is (stl) file type, size is 347.1KB.
The file 'Miniature Buildings For Giant Robot Diorama 3D Printer Model' is (stl) file type, size is 347.1KB.
I went a little crazy at the Macross Convention in Torrance. Got a bunch of Revoltech Macross action figures, and have wanted to display them a bit better than posed on my shelf.
So I designed a diorama backdrop properly scaled for these Robotech/Macross toys. Revoltech lists the scale as 1:100, but measurements put it closer to 1:120.
The buildings are solid/manifold recreations of buildings I found on Sketchup by NRO (restaurant) and by Iulian Mitran (apartment building).
The 3 street parts go together, with holes for the lamp posts, and raised areas to act as guides for the 2 buildings. I'm including an undamaged version of the apartment, but unless you have a bigger build volume than me, you might have to cut it in 2, like I did for the damaged version.
Most important thing when printing these is, to handle the overhangs (all the internal ceilings) for the apartment, you need to print it at a 45° tilt. In Cura, I set Supports for only parts touching build plate.
Here's the build album: https://imgur.com/a/lNdVj
| Apartment_no_roof.stl | 135.8KB | |
| Apartment_roof.stl | 1.6KB | |
| Apartment_Undamaged.stl | 213.8KB | |
| Damaged_Apartment_A.stl | 139.1KB | |
| Damaged_Apartment_B.stl | 165.3KB | |
| Macross_Debris_1.stl | 684.0B | |
| Macross_Debris_2.stl | 7.8KB | |
| Macross_Debris_3.stl | 12.9KB | |
| Macross_Diorama_Restaurant.stl | 592.4KB | |
| Macross_Diorama_Street_1.stl | 3.2KB | |
| Macross_Diorama_Street_2.stl | 3.6KB | |
| Macross_Diorama_Street_3.stl | 3.4KB |
