the strips are a bit loose, but the back keeps it in place.
the
beeyellow.stl
beeblack.stl
beeblue.stl
beewhite.stl
beebrown.stl
are all the files that you need but, if you want the pieces by themselves use the other files
all the pieces that you need are:
two big black eyes (left and right)
two small blue eyes (left and right)
one main body
four strips (two yellow two brown)
one stinger
one back
two wings (left and right)
that's it
| Beeblack.stl | 5.7KB | |
| Beeblack_antennae1.stl | 1.4KB | |
| Beeblack_antennae2.stl | 2.8KB | |
| beeblack_eyeleft.stl | 1.6KB | |
| beeblack_eyeright.stl | 1.6KB | |
| beeblack_eyes.stl | 3.0KB | |
| beeblue.stl | 1.3KB | |
| beeblue1.stl | 684.0B | |
| Beebrown.stl | 13.6KB | |
| beebrown_back.stl | 2.4KB | |
| beebrown_legs1.stl | 2.6KB | |
| beebrown_legs2.stl | 4.4KB | |
| beebrown_stinger.stl | 684.0B | |
| beebrown_strips1.stl | 3.2KB | |
| beebrown_strips2.stl | 6.3KB | |
| Beewhite.stl | 11.3KB | |
| Beewhite_wingleft.stl | 1.4KB | |
| Beewhite_wingright.stl | 5.9KB | |
| Beewhite_wings.stl | 11.3KB | |
| Beeyellow.stl | 17.7KB | |
| Beeyellow_mainbody.stl | 12.5KB | |
| Beeyellow_strips1.stl | 3.2KB | |
| Beeyellow_strips2.stl | 6.3KB | |
| bee_all.stl | 48.6KB |
