Collection of bolts M10 Bolts and corresponding Nut.
I got good results with %50 infill and .2 mm layer height. For sturdier Bolts I recomment 100% infill.
Bolts and Nuts have 2 mm thread pitch.
Thanks for BloodyPeanuts for his/her comments. He achieved better result with following settings:
Nuts as-is with 60% infill
Bolts at 93% scaling for x and y and 100% for Z with 100% infill
| Bolt_M10_100.stl | 1.2MB | |
| Bolt_M10_120.stl | 1.5MB | |
| Bolt_M10_140.stl | 1.7MB | |
| Bolt_M10_40.stl | 961.2KB | |
| Bolt_M10_60.stl | 780.2KB | |
| Bolt_M10_80.stl | 1009.3KB | |
| Nut_M10.stl | 158.1KB |
