This is the MagicMirror "Vauban Edition". It got his name because of its depth - and antique looks, when using marble filament. The advantage is, that you do not have to care about space.
Splitting the design into 6 parts, it was a little tricky to keep the design sturdy. I strengthened the mirror at those weak points, but still glued the bottom parts together due to the glasses weight. I did not glue everything together, because the backplate holders would make it impossible to put both glass and monitor into the case afterwards. So keep that in mind, when holding the superglue in your hands ;).
Dimensions
What you need
Can you use another LCD monitor with different dimensions?
I'd say: Of course you can. I built this design for generic LCD screens - larger and smaller. I recommend to scale this design while using a slicer.
To adjust the height, I recommend to scale the length of both middle parts AND the backplate's middle parts.
To adjust the width, you need to scale the 4 corner parts of the design, plus the 4 corner parts of the backplate.
If you want to use the connectors, print the scaled model of the MagicMirror first, and afterwards measure the space, where the connector will be put later. Then just scale the connector to the new length.
It should be pretty easy to do this. The only downside is, that the screwholes for the backplate could get a little oval.
If you decide, not to put the power strip into the frame, you could reduce the depth of the design heavily.
What I used
Optional
Which design parts do you need?
| mm-monitorboardplate.stl | 125.1KB | |
| mm-plate-b-l.stl | 77.4KB | |
| mm-plate-b-r.stl | 78.4KB | |
| mm-plate-m-l.stl | 55.2KB | |
| mm-plate-m-r.stl | 54.2KB | |
| mm-plate-t-l.stl | 79.2KB | |
| mm-plate-t-r.stl | 78.2KB | |
| mm-vauban-bottom-left.stl | 85.5KB | |
| mm-vauban-bottom-right.stl | 85.5KB | |
| mm-vauban-connector-front.stl | 2.4KB | |
| mm-vauban-connector-inner-with-support.stl | 2.0KB | |
| mm-vauban-connector-inner.stl | 1.4KB | |
| mm-vauban-connector-top.stl | 1.8KB | |
| mm-vauban-corner-support.stl | 1.4KB | |
| mm-vauban-middle-left.stl | 53.0KB | |
| mm-vauban-middle-right.stl | 53.0KB | |
| mm-vauban-top-left.stl | 78.9KB | |
| mm-vauban-top-right.stl | 78.9KB | |
| model.pdf | 70.8KB |
