M35 With Hoist 1/35 Scale 3D Printer Model
The file 'M35 With Hoist 1/35 Scale 3D Printer Model' is (stl) file type, size is 3.8MB.
The file 'M35 With Hoist 1/35 Scale 3D Printer Model' is (stl) file type, size is 3.8MB.
This is my second version of this vehicle. The first was too small, so I rescaled everything. A glitch with the server made several files duplicate and some of the older files wouldn't go away, so I decided the easiest thing to do would be to delete the entire thing and start over.
A 1/35 M35 2 1/2 ton cargo truck with an optional hoist for the bed. I originally had the hoist in multiple parts, but it proved too quirky for the 3D printer to handle and come out right, so I just created two complete hoists, one extended for being used and one folded up for when the truck is moving.
Keep an eye out, I plan on doing a wrecker setup for it at some time and maybe some other options even such as a gun truck or the such.
| Air_Filter_1.stl | 290.7KB | |
| Air_Filter_2.stl | 44.7KB | |
| Air_Filter_3.stl | 275.2KB | |
| Air_Filter_Breather.stl | 113.5KB | |
| Air_Filter_Pipe.stl | 168.1KB | |
| Bed.stl | 336.2KB | |
| Bed_Front_Left_Side.stl | 3.5KB | |
| Bed_Front_Right_Side.stl | 3.4KB | |
| Bed_Rear_Left_Side.stl | 3.6KB | |
| Bed_Rear_Right_Side.stl | 3.4KB | |
| Bed_Tail_Gate.stl | 3.6KB | |
| Cab_Floor.stl | 261.0KB | |
| Chassis.stl | 110.9KB | |
| Dash.stl | 49.7KB | |
| Engine.stl | 327.8KB | |
| Exhaust_Input_Pipe.stl | 14.9KB | |
| Exhaust_Main.stl | 1015.1KB | |
| Exhaust_Top_Pipe.stl | 262.1KB | |
| Exhaut_Pipe_Bracket.stl | 273.9KB | |
| Fender_Lights.stl | 68.8KB | |
| Front.stl | 28.8KB | |
| Front_Axle.stl | 117.2KB | |
| Front_Bumbper.stl | 205.4KB | |
| Front_Rim_Print_3_2_for_vehicle_1_for_space.stl | 184.9KB | |
| Gas_Tank.stl | 636.6KB | |
| Gas_Tank_Bracket.stl | 168.9KB | |
| Gas_Tank_Pipe.stl | 170.0KB | |
| Gear_Sticks.stl | 103.6KB | |
| Grill.stl | 475.2KB | |
| Hoist_Base_Plate.stl | 232.3KB | |
| Hoist_Block_Hook.stl | 448.6KB | |
| Hoist_Extended.stl | 1.3MB | |
| Hoist_Folded.stl | 2.5MB | |
| Hoist_Platform.stl | 82.4KB | |
| Hood.stl | 375.0KB | |
| Left_Engine_Wall.stl | 12.2KB | |
| Left_Fender.stl | 23.5KB | |
| Left_Front_Grill.stl | 32.6KB | |
| Left_Side_Door.stl | 55.3KB | |
| Lower_Back_Wall.stl | 16.6KB | |
| Rear_Axle.stl | 392.9KB | |
| Rear_Bumper.stl | 257.5KB | |
| Rear_Dual_Rims_Print_4.stl | 364.1KB | |
| Right_Engine_Wall.stl | 12.2KB | |
| Right_Fender.stl | 23.5KB | |
| Right_Front_Grill.stl | 32.6KB | |
| Right_Side_Door.stl | 55.3KB | |
| Roof.stl | 106.9KB | |
| Shafts.stl | 542.4KB | |
| Steering_Links.stl | 2.0MB | |
| Stepboard.stl | 222.0KB | |
| Stepboard_Bracket.stl | 51.1KB | |
| Tire_Print_11.stl | 1.1MB | |
| Transfer_Case.stl | 80.7KB | |
| Upper_Back_Wall.stl | 18.0KB | |
| Winch_Parts.stl | 402.9KB | |
| Wind_Shield.stl | 52.1KB |
