This model should printable even with 200mm printer. However, it should be very tight fit, so you most likely will need some sandpapering to get parts to fit nicely.
Model "loki_sceptre_fullModel" has the complete model. However, this better for kitbashing, as it doesn't have boolean operators applied. Models named "scepter_full_cleaned" and "scepter_full_cleaned_WithoutDiamond" are full models with boolean operators applied.
Model is scaled to about 98cm length.
11.7.2021. Added new files. Files are marked as "LIGHTS_XXX". With those files you can add a led to the gem, and a hidden wire going from the led back to the stock, where there is a room for 75mm x 32mm x 18mm battery box.
25.8.2021. Included a file so the pommel should be able to connect to the rod. Named "LIGHTS_BOTTOM_FIXED".
| bottomKnifeFirst.stl | 6.1MB | |
| bottomKnifeSecond.stl | 3.0MB | |
| diamond.stl | 19.6KB | |
| diamondHolder.stl | 97.7KB | |
| diamondHolderHolder.stl | 628.9KB | |
| grip.stl | 1.5MB | |
| LIGHTS_BOTTOM_FIXED.stl | 734.7KB | |
| LIGHTS_DIAMONDHOLDER.stl | 104.9KB | |
| LIGHTS_DIAMONDHOLDERHOLDER.stl | 641.6KB | |
| LIGHTS_HANDLE.stl | 1.5MB | |
| LIGHTS_HANDLE2.stl | 2.3MB | |
| LIGHTS_PEGBETWEENRODS.stl | 200.1KB | |
| LIGHTS_ROD1.stl | 219.5KB | |
| LIGHTS_ROD2.stl | 1.8MB | |
| LIGHT_DIAMOND2.stl | 26.4KB | |
| Loki_sceptre_fullModel.stl | 21.5MB | |
| partThatHoldEverything.stl | 1.5MB | |
| peg1.stl | 6.1KB | |
| peg2.stl | 684.0B | |
| rod2.stl | 1.8MB | |
| rod_1.stl | 202.4KB | |
| scepter_full_cleaned.stl | 18.1MB | |
| scepter_full_cleaned_withoutDiamond.stl | 18.1MB | |
| stuff1.stl | 1.7MB | |
| stuff2.stl | 2.3MB | |
| stuffThatHoldsKnifesTogether.stl | 2.6MB | |
| topKnife.stl | 1.7MB |
