[UPDATE]
There is my upgraded model with integrated limit switches: https://www.thingiverse.com/thing:5173219
In most cases all the parts required to build this can be found in computer optical drives, but I also added a version with linear bearings instead of brass bushes(not all drives have them).The linear bearing version is better in my opinion but both work well.Parts needed from cd/dvd drive:
-3mm shaft
-linear stepper motor
-slide bushes (if there are no brass slide bushes in the drive, use 2 LM3UU bearings)
-M3 screws
You should use glue on parts placed on shaft (clutch and nut).In some stepper motors the holes must be enlarged to fit M3 screws
How it works: https://youtu.be/nML0P0cFWjI
Linear bearnigs if needed(choose LM3UU option) : https://s.click.aliexpress.com/e/_AsEc8S
Step files: https://drive.google.com/drive/folders/1dXIVqyzUB_mrgUrEh6H3EsR2uR3m4u6S?usp=sharing
| basic_cover.STL | 52.4KB | |
| basic_frame.STL | 160.7KB | |
| clutch.STL | 188.1KB | |
| cover_with_bearings.STL | 59.6KB | |
| frame_with_bearings.STL | 171.1KB | |
| nut.STL | 14.2KB |
