LEGO Duplo train CAR - NOT fully printable!!!
some parts are compatible with original Duplo "new red passenger Car"
Black, yellow and grey parts are easy printable.
Red part needs perfect bridging. One stl model has easy separable support parts, second version is made WITHOUT support - must be generated by your slicer software.
7 screws and 4 axis are needed.
I like to use "recycled" parts. Axis and screws were extracted from old VHS cassettes. One cassette contains 5 screws and 1 metal axis. 4 cassettes needed for one CAR! But you will obtain 13 screws for next projects :)
Different cassettes has little bit different axis dimensions - wheels, holder parts and 4 holes in main black part must be corrected by drill.
Dimensions of my "VHS" parts:
Axis: 2,5 x 20mm (4x)
Screw: 2,5 x 16mm
| Duplo_CAR_cab_-_NO_SUPPORT_BETA.stl | 633.7KB | |
| Duplo_CAR_cab_-_NO_SUPPORT_BETA_Scale_XY_100-6.stl | 633.7KB | |
| Duplo_CAR_cab_support_antiwarp_BETA.stl | 715.3KB | |
| Duplo_CAR_cab_support_antiwarp_BETA_Scale_XY_100-6.stl | 715.3KB | |
| Duplo_CAR_conn_part.stl | 62.8KB | |
| Duplo_CAR_conn_part_antiwarp.stl | 89.3KB | |
| Duplo_CAR_lower_part.stl | 570.4KB | |
| Duplo_CAR_lower_part_antiwarp.stl | 572.3KB | |
| Duplo_CAR_lower_part_antiwarp_Scale_XY_100-6.stl | 572.2KB | |
| Duplo_CAR_lower_part_Scale_XY_100-6.stl | 570.3KB | |
| Duplo_CAR_roof_antiwarp.stl | 222.7KB | |
| Duplo_CAR_roof_support_antiwarp.stl | 233.3KB | |
| Duplo_CAR_upper_part.stl | 1.2MB | |
| Duplo_CAR_upper_part_antiwarp.stl | 1.2MB | |
| Duplo_CAR_upper_part_antiwarp_Scale_XY_100-6.stl | 1.2MB | |
| Duplo_CAR_upper_part_Scale_XY_100-6.stl | 1.2MB | |
| Duplo_CAR_wheel.stl | 232.5KB | |
| Duplo_CAR_wheel_lock.stl | 16.5KB | |
| Duplo_CAR_yellow_conn.stl | 463.5KB | |
| Duplo_CAR_yellow_conn_antiwarp.stl | 470.9KB |
