LED Desk Lamp 3D Printer Model
The file 'LED Desk Lamp 3D Printer Model' is (STL) file type, size is 2.1MB.
The file 'LED Desk Lamp 3D Printer Model' is (STL) file type, size is 2.1MB.
I saw something like this online a while back and couldn't find it again, so I decided to design and print my own. You will also need 2 smooth rods (0.5" x 12"). I used aluminum, although you can use whatever material you'd like. The center hole in the slats gets progressively smaller towards the top. You will also need an LED strip (I got a color changing one off amazon). I included a spacer to make sure each slat is evenly spaced (spaced at 0.5"). all pieces were super-glued onto the smooth rods.
| Base.STL | 4.4MB | |
| Slat_1.STL | 262.0KB | |
| Slat_10.STL | 262.0KB | |
| Slat_2.STL | 262.0KB | |
| Slat_3.STL | 262.0KB | |
| Slat_4.STL | 262.0KB | |
| Slat_5.STL | 262.0KB | |
| Slat_6.STL | 262.0KB | |
| Slat_7.STL | 262.0KB | |
| Slat_8.STL | 262.0KB | |
| Slat_9.STL | 262.0KB | |
| Spacer.STL | 35.2KB | |
| Top.STL | 196.6KB |
