Launch Umbilical Tower For LEGO® Saturn V 3D Printer Model

Author: @
License: CC BY-NC
File formats: stl,zip
Download type: zip
Size:1.4MB

The file 'Launch Umbilical Tower For LEGO® Saturn V 3D Printer Model' is (stl,zip) file type, size is 1.4MB.

Summary

This is a modification of farscape1's Saturn V launch tower to fit the LEGO® Saturn V.

The brick should be printed with a high-accuracy printer such as polyjet or possibly SLA, and will replace the four 2x4 bricks at the bottom of the first stage. They each connect to a 2-length LEGO® axle in the modified hold-down clamp

Anything not included in these files should be printed from farscape1's files at 54.054% scale

Since the LEGO® rocket is proportioned somewhat differently, some of the arms will need to be moved. I have provided modified walkways to bring the arms to the correct height. I also included some parts modified for strength and print quality at the smaller size.

Clip.stl and Ring.stl can be combined into a clip to hold the top of the rocket to the sway arm to help prevent the rocket falling over.

LEGO® is a trademark of the LEGO Group which does not sponsor, authorize, or endorse this thing.

Clip.stl 5.4KB
Hold_Down_Clamp.stl 277.6KB
Hold_Down_Connector_Brick.stl 224.7KB
ModifiedParts.zip 1.3MB
Ring.stl 56.2KB