This is a replacement magazine lip for the KWC made Umarex CO2 Glock 17 gen 4 airsoft magazine.
These magazine feed lips break easily if the mag is dropped, and I have never been able to find replacement parts available for purchase from KWC.
I measured and reverse engineered the magazine feed lip part.
To replace, drive out the pin holding the feed lip in place using a small punch and hammer.
Looking at the magazine from the front, where the BB loading slot and spring are located, the pin drives out from left to right.
Remove the damaged feed lip, swap the CO2 sealing rubber part and new feed lip to the magazine, and replace the pin. Tap the pin lightly with a small hammer to seat it.
In my own testing this printed part feeds and functions reliably.
| Umarex_Glock_17_Gen_4_CO2_KWC_Magazine_Lip.STL | 221.5KB |
